Elixer

Nicora Elixer

At Elixer, we have developed revolutionary products that allow our clients to coat a huge range of surfaces and materials with a solid veneer of cold spray metal, our specialist area being bespoke metallic finishes to give the appearance and feel of solid metal.

We are recommended Elixer is such a best solution to replace the Powder Coat Technology in protection of the metal in today's present. This extremely metal coating became quickly preferred due to its strength, beauty, easy to apply without heating and versatilities.

The invention of this technology is to deliver surface decoration solutions to the diverse challenges of clients. The almost magical properties are to have it finishes in a manner totally unique to you.

Specification

Uses
Suitable as solution replacing Powder Coat technology for decoration and protection of surfaces such as metal fixtures, aluminium, cement, wood, advertising materials, PVC, paper, sculpture, statue, art & craft, ceramic, plaster, fiberglass, polystyrene, wall, stones and clay. This extremely NEW coating became quickly preferred due to its strength, beauty, easy to apply without heating and versatilities.

Features

Superior final hardness
Excellent adhesion properties
Tough, durable and versatilities
Attractive metallic look of outstanding
Good resistance to scratch and abrasion
Easy to spray to cover wider coverage areas
Not necessary to apply overcoat and no heating required
Different spray gun types tend to have unique artworks
Attractive colours when spray on different colours of base coat

Application Data

Method
- Air spray

Theoratical Coverage
- >12m2 / litre depending on application method and film thickness

Dilution
- Xylene or butyl acetate

Drying Time

• Surface dry		: 30 mins
• Touch dry		: 60 mins
• Hard dry		: 24 hours

Overcoating Time
• Not required.

Cleaning
• Wash with xylene or butyl acetate.

Direction Of Use

elixer-direction

Direction Of Use

Ensure surfaces are clean.
Apply primer / undercoat.
Spray gloss paint and leave it to dry.
Use 1.5mm Gravity spray gun type.
Stir the paint well until homogenous.
Mix Part A and Part B at mixing ratio of 1.1/0.9.
Pot life for mixture is 3 hours.
No dilution is required.
Press the gun and turn the pressure knob anti-clockwise to set a low pressure.
Apply the paint with different spray gun pressure according to your design. 1-2 coats are recommended. Not necessary to apply overcoat.

Range Of Products

Specification

Application Data

Direction Of Use

Colour Code

Image Gallery

Video